char *song_00 = “Pacman:d=32,o=5,b=112:32p,b,p,b6,p,f#6,p,d#6,p,b6,f#6,16p,16d#6,16p,c6,p,c7,p,g6,p,e6,p,c7,g6,16p,16e6,16p,b,p,b6,p,f#6,p,d#6,p,b6,f#6,16p,16d#6,16p,d#6,e6,f6,p,f6,f#6,g6,p,g6,g#6,a6,p,b.6”; char *song_01 = “Druid:d=4,o=5,b=80:8g.6,16a6,16a#6,16g6,c7,8a#6,16a6,16a#6,a6,g6,8p,8g.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
This is the official documentation for NCC Group’s free and open source Depthcharge project. If you’re new to the project, we recommend starting with the introduction section to get up to speed. For some additional context and inspiration, check out the following blog posts and talks:
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Sometimes reverse engineering embedded systems can be a right old faff, with you needing to resort to all kinds of tricks such as power glitching in order to poke a tiny hole in the armour, giving you an way in. And, sometimes the door is just plain wide open.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
In this post, we’ll explore at a high level the key concepts of programming microcontrollers. Then, to further demystify them, we’ll write a small Rust program and run it on an ARM microcontroller. One of the most idealized physical forms a system can achieve is “the box”.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
This document is intended as an introduction to Rust, targeted at engineers with deep exposure to embedded systems C, and little to no experience with C++ and no knowledge of Rust. This document will:
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
The ESP32 is powerfull, open source and supports Wifi & Bluetooth, making it the first choice for this project. ESP32 is affordable and compatible with Arduino IDE & micropython.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
I’d recently bought a new XPS13 7390 (non 2-in-1) laptop. I had bought the 8GB variant, how hard could it be to upgrade? I use my laptop for KiCad PCB design, compiling embedded firmware, and FPGA synthesis. None of these really use that much RAM.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Circuit sculpture is engineering and art all at play together. One must combine the functional with the aesthetically appealing. [EdwardA61] did just that with this enchanting lamp build.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
There’s something about the large imposing wooden box of an arcade machine that lends a confident presence to a room. The problem with a tall and heavy box is that it takes up quite a bit of space and readily draws the eye.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
FRANCAIS 日本語 by Jérémie Cortial & Roman MiletitchInvent the future of pinball with paint markers and a simple sheet of paper, and play it on a game machine straight out of science fiction ! Official Promotion video directed by Marty% / BGM: Jay B Baby No need to be an expert, use big color m
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.