Use Cypress Solar-Powered BLE Sensors, an Arduino UNO, and an HM10 BLE module to make your own multi-node temperature and humidity monitor and display.

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2pF2fgM
via IFTTT

[Nicholas] built a simple NFC tag using an ATtiny84 microcontroller, four resistors, three capacitors, a diode, and an antenna. It implements ISO 14443-3, a standard for identification cards, an

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2oWuN1O
via IFTTT

An old Episode I R2-D2 figure modded with a red LED powered by NFC only!

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2oTmWBo
via IFTTT

What would I do without LEDs and hot glue? They are integral components to nine tenths of my projects. Well, while I was working on my first instructable I noticed that the LEDs I’d hot glued onto the wires kind of made the translucent glue glow a bit. I thought to myself, “What would happen if I put the glue on the focus end?” And so, this instructable was born. Usually when I’m diffusing a “Water Clear” LED I grab the sandpaper and go to town, but this works just as well if size isn’t a problem, and looks better in the end. ***UPDATE 5/3/10:  Hey, if you make your own Hot Glue diffused LED project and post some pictures in the comments section, I’ll give you a patch!***

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2p4x4KU
via IFTTT

What happens when you take over 800 individually addressable super bright RGB LEDs and house them in a giant diffused panel? You get awesome. That’s what you get.

[Epoch Rises] is a smal

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2qfizlt
via IFTTT

In this week’s Teardown Tuesday, we tear down a PlayStation Move controller to see what ICs and parts make up current gaming technology.

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2pzEqro
via IFTTT

Blinky LED projects: we just can’t get enough of them. But anyone who’s stared a WS2812 straight in the face knows that the secret sauce that takes a good LED project and makes it great is th

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2pzKLD8
via IFTTT

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2pe9XOP
via IFTTT

Components that use wafer-level packaging (WLP), such as the MAX4000x series, are valuable options when size reduction is a critical design goal.

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2pXiuU9
via IFTTT

Arduino MKRFOX1200 has been designed to offer a practical and cost effective solution for makers seeking to add SigFox connectivity to their projects with minimal previous experience in networking. It is based on the Atmel 

… from Digital Electronics & DIY | Scoop.it http://ift.tt/2pd0kji
via IFTTT