The quick answer is that my preferred tools are shown in Fig. 1 on the right. Each of these tools has its purpose. GNU make is fundamentally a software build management tool. It tries to build components by only rebuilding those pieces that have changed.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
_____ __ __ _ __ / ___/__ / /__ ____/ / (_) /____ / /__/ _ \/ / _ \/ __/ /__/ / __/ -_) \___/\___/_/\___/_/ /____/_/\__/\__/ Copyright (c) 2020, EnjoyDigital Powered by Migen & LiteX [> Intro This small project is an attempt to use a $15 FPGA board to do some remote control/monitoring over an Eth
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Sleep schedules are an early casualty in the fight to be productive. Getting good sleep is an uphill battle, so anything that can help us is a welcome ally.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Do you have an existing hifi system that’s too old to support Apple Airplay? Don’t want to replace it with lower-quality wireless speakers, but want to stream music? It’s a common problem.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
In this Instructables, I will show you how to use raspberry pi 3 as Chromecast alternative. It is also worth mentioning that this is not a direct clone to Chromecast and that there are limitations.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
This little Raspberry Pi based project is a gift for my wife’s grandmother for her 90th birthday. Being visually impaired, she is hard to entertain but loves to listen to audiobooks. The problem is, that she isn’t able to handle a ghetto blaster or MP3 player.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Old MCUs from vendors like ATMEL and MICROCHIP, like the PIC16F and Atmega family, tend to have a special programming interface to program internal flash. For example, Atmega used SPI pins (MISO, MOSI, SCK) and PIC used two pins (PGC, PGD)— one as a clock and another as a bi-directional data line.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
SymbiFlow – open source FPGA tooling for rapid innovation SymbiFlow is a work-in-progress FOSS Verilog-to-Bitstream (end-to-end) FPGA synthesis flow, currently targeting Xilinx 7-Series, Lattice iCE40 and Lattice ECP5 FPGAs. Think of it as the GCC of FPGAs.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Tim [Mithro] Ansell has a lot to tell you about the current state of open FPGA tooling: 115 slides in 25 minutes if you’re counting. His SymbiFlow project aims to be the GCC of FPGA toolchains: cross-platform, multi-platform, completely free, and all-encompassing.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
JTAG is a physical hardware interface that makes it possible, among other things, to extract the firmware image from electronic devices.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.