The rise of low-cost 3D printers has enabled fabrication and rapid prototyping of all sorts of structures that once required either great skill and lots of time, or a large budget and access to industrial equipment, to produce.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Over the past years, I have gotten deeper and deeper into 3d-printing. One thing that fascinates me a lot is how different it is from other manufacturing methods. And how this, in turn, means a completely different design philosophy is needed to create good designs for 3d-printing.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
PETG is a pretty great material to print 3D models with, but one issue with it is that gluing it can be a bit of a pain.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Despite initial interest in the 1990s and early 2000s, palmtop computers never really took off.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
We’ve always found the various methods for adding text and graphics to 3D prints somewhat underwhelming. Embossed or debossed characters are fuzzy, at best, and multi-color printers always seem to bleed one color into the next.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
Kitting out a full workshop can be expensive, but if you’re only working on small things, it can also be overkill. Indeed, if your machining tends towards the miniature, consider building yourself a series of tiny machines like [KendinYap] did.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.
[3D SANAGO] is a bit of a master when it comes to using a 3D-printing pen. Their latest work involved fixing a broken humidifier and giving it a Pokemon-themed makeover. It’s an education in just what can be achieved with a tool many of us write off as a simple novelty.
from Pocket
via Did you enjoy this article? Then read the full version from the author’s website.